In daily life, we use Air Conditioner Switch may be frequent open Air Conditioner Switch, in fact, the central Air Conditioner Switch switch also need to follow a certain principle of use, is stressful, the correct operation can reduce the loss of Air Conditioner Switch life. Pay more attention to detail, Air Conditioner Switch is also good for the. Today, Yaxin to bring you Air Conditioner Switch switch need to pay attention to some small problems, interested friends do not miss it!
First of all, whether it is manual switch or remote control operation, air conditioner boot operation is basically as follows:
1. According to Air Conditioner Switch requirements and the use of requirements, select the Air Conditioner Switch mode of operation, such as refrigeration, heating, dehumidification or ventilation. This is simply by pressing the Run mode selection key on the air conditioner.
2. Set the temperature and adjust the temperature of the temperature regulator. In general cooling operation, the temperature value is set at 20-30 ℃. Heating operation, the temperature value set in the range of 14-27 ℃, set the temperature value refers to the air conditioner return air temperature or room temperature. In order to test whether the compressor can run, the cooling set value should be lower than the indoor temperature, heating should be higher than the indoor temperature. So that after the air conditioner boot,Air Conditioner Switch you can determine whether the normal operation of the compressor.
After completing the above operation, open the air conditioner, air conditioner can run according to the selected mode of operation.
Next, after the start of operation, according to the need to adjust the air flow switch to adjust the air conditioner cooling (heat) the amount.
General air conditioner cooling (heat) the amount of regulation by changing the air volume to achieve the purpose of regulation (frequency conversion air conditioner is to adjust the compressor speed). Window air conditioners are generally set with strong cold and weak cold or strong heat and weak heat knob, the knob set in the strong cold (hot) or weak cold (heat), the actual adjustment is the amount of high air flow or low air volume. Separate air conditioner used in the remote control is generally equipped with high, medium and low third gear speed to choose from. According to the indoor temperature requirements, by adjusting the air conditioner speed file to achieve the purpose of regulating the cooling or heating.
In the case of refrigeration, for example, after the air conditioner is turned on, there may be two cases:
First, air conditioner compressor open stop frequently, and the indoor temperature drop down;
Second, the indoor temperature is too low, and the air conditioner compressor does not stop running. This may be the temperature regulator's temperature setting is incorrect (too high or too low). Should be appropriate to adjust the temperature set value,Air Conditioner Switch so that the indoor temperature to meet the required value, so as to avoid frequent air compressor compressor stop or room temperature deviation is too large.
Air conditioner for any reason for the shutdown (such as sudden power failure, human downtime, etc.).
As the general air conditioners are equipped with a downtime delay time (delay time of about 3min), then this type of air conditioner shutdown immediately after the boot, but it takes 3min to run. But no time delay of the air conditioner, after the shutdown can not immediately boot,Air Conditioner Switch be sure to have about 3min, to re-open the air conditioner, or may cause the starting current is too large, burn the fuse, and even burn the compressor motor consequences.
Finally, the air conditioner should not switch frequently.
Do not start and close the air conditioner frequently because the room temperature has reached the required value or above the required value, but should allow the air conditioner to control the start and stop via the temperature controller. When the air conditioner is not in use, turn off the power and unplug the power plug.
- Start With The Machine Starts
- Lock Structure
- What Is The Working Principle Of Pr...
- Part Of The Seat Safety Switch
- Cam Switch Works
- What Is A Switch
- Characteristics Of The Foot Switch
- High Beam Lights Is One Of The Impo...
- Little Exposure To Low Beam Lights
- Advantages Of Noise Environment Mon...
- Car Trunk Switch You Can Replace Th...
- Air Conditioner Switch Better Norma...
- High Beam Lighting Switches Protect...
- Electrical Door Lock Switch Very Re...